Operation Manual

SIMULATOR MODE

This mode provides you with the ability to practice various dive

mode scenarios and computer functions while observing the vari-

ous displays.

 At any time while in Simulator Mode, pressing and holding

Both buttons simultaneously for 2 seconds will revert operation

to real Surface Mode.

 The Set Points entered into the XR2 do not affect the operation

of the Simulator which has its own settings that allow Digital

Gauge Mode to be set ON or OFF, calculations to be cleared,

and FO2 to be set.

Access and Setup (while in Surface Mode)

 To access, press and hold Both buttons for 6 seconds.

 Release the buttons during the 2 second window when the SIM

graphic appears with the DEMO icon (Fig. 78).

 Press and release the Advance (Front) button to access Simula-

tor Mode. The graphic GAUG and DEMO icon appear with

OFF (or ON) flashing (Fig. 79).

When GAUGE is set ON, the Simulator will operate as the XR2

would in normal User Set Digital Gauge Mode, only displaying

Depth, Max Depth, Elapsed Dive Time, Temperature, and Time of

Day.

Fig. 79 - Set Demo Gauge

Fig. 78 - Simulator Mode