Operation Manual

73
AFTER THE FIRST 2 HOURS
Two hours after the last dive, Surface Mode will no longer be dis-
played. The Time to Fly and Desaturation countdown screens will
be displayed alternately for 3 seconds each until they count down
to 0:00 or another dive is made.
To access other modes or enter settings -
 Press Either button to return to Surface Mode.
 The unit will again revert to the Time to Fly and Desaturation
countdowns after 2 hours, if no button is pressed.
WET ACTIVATION CONTACTS
If the graphic H2O appears on the FLY screen (Fig. 75) and SAT
screen (Fig. 76), it is an indication that the Wet Activation Con-
tacts are bridged (still wet) and the unit should be rinsed in fresh
water and thoroughly dried .
 Once the unit is dry, the graphic H2O will disappear.
 If the unit is not cleaned and dried prior to the countdowns
reaching 0:00 (hr:min), or making another dive, it will shut off
then automatically reactivate.
 The graphic H2O would then appear in place of Dive Number
on the Surface Mode display.
 If no dive is made, the unit would shut off after 2 hours, then
automatically reactivate again, repeating the action until cleaned
and dried.
Fig. 75 - Fly Mode
(Activation Contacts Wet)
Fig. 76 - Desaturation Mode
(Activation Contacts Wet)