Operation Manual

AFTER THE TRANSITION PERIOD (THE FIRST 2 HOURS)

For the remainder of the first 2 hours after surfacing, information

will be displayed as Surface Mode (Fig. 68) and you will have full

access to other modes (e.g., Plan, Fly, Sat, Log, Set, Sim, PC).

To activate the Backlight, press the Select (Side) button.

To access the Dive Planner (Plan Mode) -

(Also refer to page 44)

 Press the Advance (Front) button 1 time (while in Surface

Mode).

 Press and release the Select (Side) button to step through the se-

quence of available depths/times one screen at a time.

 The unit will revert to Surface Mode after 2 minutes, unless the

Advance (Front) button is pressed to access the Fly Mode.

The Dive Planner now shows 'adjusted' No Decompression Limits

(Fig. 69) based on residual nitrogen and accumulated oxygen cal-

culated to be remaining from the previous dives.

NOTE: The Planning Sequence will only advance

to the maximum depth allowed by the nitrogen or

oxygen limit, whichever is in control. The respec-

tive bar graph will be displayed to indicate which

is in control.

Fig. 68 - Surface Mode

Fig. 69 - Plan Mode