Operation Manual

67
Log Mode during the Transition Period
To view that dive's Log Preview screen (Fig. 67) -
 Press the Advance (Front) button 1 time.
 Press the Select (Side) button 1 time to view that dive's Log Ni-
trogen data screen.
 Press the Select (Side) button again to view that dive's Log
Oxygen data screen (if a nitrox dive).
 Press Both buttons simultaneously for 2 seconds to return to
Surface Mode.
 The unit will revert to Surface Mode after 2 minutes if no but-
ton is pressed.
Log Data will not be stored in the unit's memory until the 10
minute Transition Period on the surface is completed.
Once 10 minutes have elapsed, the Surface Mode icon and Surface
Interval time display colon stop flashing indicating that the Dive
and Transition Period are completed, and a subsequent Descent
will be considered a new dive.
If you descend during the 10 minute Transition Period, time under-
water will be considered a continuation of that dive. The time at
the surface (if less than 10 minutes) will not be added as Dive
Time.
Fig. 67 - Log Preview Screen