Operation Manual

40
TO SET - DIGITAL GAUGE MODE
(while in the Surface Mode)
Factory set OFF, Digital Gauge Mode can also be set ON. This
feature is described on page 65.
NOTE: Once a dive is made with this feature set
ON, the setting will be locked ON for 24 hours after
the dive. Set Digital Gauge Mode will not appear
as a selection for 24 hours after the dive.
 Depress Both buttons simultaneously, release when SET 2 ap-
pears (4 seconds).
 Press and release the Advance (Front) button, the Units screen
appears with the set point flashing.
 Press and release the Advance (Front) button 14 more times.
 The graphic GAU appears with the set point graphic OFF (or
ON) flashing (Fig. 39).
 Press and release the Select (Side) button to toggle between
OFF and ON.
 Press and release the Advance (Front) button to accept the set-
ting and advance to Set Wet Activation Mode, or depress and
hold Both buttons for 2 seconds to revert to Surface Mode.
Fig. 39 - Set Digital Gauge Mode