Operation Manual

39
TO SET - SAMPLING RATE (while in the Surface Mode)
Factory set for 30 (seconds), the Sampling Rate can be set to val-
ues of 2, 15, 30, or 60 (seconds), or 2, 5, 10 feet (.5, 1.5, 3 meters).
Sampling Rate is the interval at which data samples are recorded in
the unit's memory during a dive for subsequent download to the PC
Interface program. This setting has no effect on update frequency
of data displayed during dive activity or data in the unit's Log.
 Depress Both buttons simultaneously, release when SET 2 ap-
pears (4 seconds).
 Press and release the Advance (Front) button, the Units screen
appears with the set point flashing.
 Press and release the Advance (Front) button 13 more times.
 The graphics SR and SECS (or FT or M) appear with the Sam-
pling Rate value flashing (Fig. 38).
 Press and release the Select (Side) button to advance the Rate
one selection at a time, or press and hold the button to scroll
through the Set Points at a rate of 4 per second.
 Press and release the Advance (Front) button to accept the set-
ting and advance to Set Digital Gauge Mode, or depress and
hold Both buttons for 2 seconds to revert to Surface Mode.
Fig. 38 - Set Sampling Rate