Operation Manual

TO SET - BACKLIGHT DURATION

(while in the Surface Mode)

Factory set for 5 (seconds), the Backlight Duration can be set to

values of 0, 5, or 10 (seconds).

Backlight Duration is the length of time (seconds) the Backlight

will remain ON after the button is released to activate it.

 Depress Both buttons simultaneously, release when SET 2 ap-

pears (4 seconds).

 Press and release the Advance (Front) button, the Units screen

appears with the set point flashing.

 Press and release the Advance (Front) button 12 more times.

 The graphic GLO and clock icon appear with the Time Dura-

tion value flashing (Fig. 37).

 Press and release the Select (Side) button to advance the Dura-

tion from :00 to :05 to :10 (seconds) and back to :00.

 Press the Advance (Front) button to accept the setting and ad-

vance to Set Sampling Rate, or depress and hold Both buttons

for 2 seconds to revert to Surface Mode.

Fig. 37 - Set Backlight Duration