Operation Manual

32
TO SET - YEAR (while in the Surface Mode)
Factory set for the factory local Date, the Date can be set to values
between 1/01/2005 and 12/31/2042.
Adjustments for Leap Years are performed automatically.
 After having set and accepted the Time of Day, the Date ap-
pears with the graphic dAY, and Year value flashing (Fig. 29).
 Press and release the Select (Side) button to advance the Year
value in increments of one year, or depress and hold the button
to scroll through the Set Points at a rate of 4 per second.
 Press the Advance (Front) button to accept the setting. The
Month value flashes (Fig. 30).
 Press and release the Select (Side) button to advance the Month
value in increments of one month, or press and hold the button
to scroll through the Set Points at a rate of 4 per second.
 Press the Advance (Front) button to accept the setting. The
Day value flashes (Fig. 31).
 Press and release the Select (Side) button to advance the Day
value in increments of one day, or press and hold the button to
scroll through the Set Points at a rate of 4 per second.
 Press the Advance (Front) button to accept the setting and ad-
vance to Set Audible Alarm, or depress and hold Both buttons
for 2 seconds to revert to Surface Mode.
Fig. 29 - Set Year
Fig. 31 - Set Day
Fig. 30 - Set Month