Operation Manual

31
TO SET - TIME OF DAY (while in the Surface Mode)
Factory set for factory local time, the Time can be set to values be-
tween 0:00 to 12:59 (Am/Pm) or 0:00 to 23:59 (24 Hr Format).
 Depress Both buttons simultaneously, release when SET 2 ap-
pears (4 seconds).
 Press and release the Advance (Front) button, the Units screen
appears with the Set Point flashing.
 Press and release the Advance (Front) button 2 more times.
The Time of Day (with clock icon) and graphic AM or PM ( if
Hour Format is set for 12 Hour) appear with the Hour value
flashing (Fig. 27).
 Press and release the Select (Side) button to advance the Hour
value in increments of one hour, or depress and hold the button
to scroll through the Set Points at a rate of 4 per second.
 Press and release the Advance (Front) button to accept the set-
ting. The Minute value flashes (Fig. 28),
 Press and release the Select (Side) button to advance the Minute
value in increments of one minute, or press and hold the button
to scroll through the Set Points at a rate of 4 per second.
 Press the Advance (Front) button to accept the setting and ad-
vance to Set Date, or press and hold Both buttons for 2 seconds
to revert to Surface Mode.
Fig. 28 - Set Minute
Fig. 27 - Set Hour