Operation Manual

ENTERING SETTINGS -SET MODE 2

As in the SET 1 Menu, to return to Surface Mode at any time while

in the SET 2 Menu, depress and hold Both buttons simultaneously

for 2 seconds. The unit will also revert to Surface Mode after 2

minutes if no button is pressed.

Sequence of the SET 2 Menu

Units > Hour Format > Time > Date > Audible Alarm >

NiBG Alarm > Dive Time Remaining Alarm > PO2 Alarm >

FO2 Default > Backlight Duration > Sampling Rate >

Digital Gauge Mode > Wet Activation

TO SET - UNITS OF MEASURE (while in the Surface Mode)

Factory set for Imperial, Units can also be set for Metric.

 Depress Both buttons simultaneously, release when SET: 2 ap-

pears (4 seconds).

 Press and release the Advance (Front) button, the Units screen

appears with the graphics FT (or M), and the Temperature icon

and graphic F (or C) flashing (Fig. 25).

 Press and release the Select (Side) button to toggle between Im-

perial units (FT and F ) and Metric units (M and C).

 Press the Advance (Front) button to accept the Units setting and

advance to Set Hour Format, or depress and hold Both buttons

for 2 seconds to revert to Surface Mode.

Fig. 25 - Set Units of Measure