Operation Manual

Due to the importance of the information it presents, the Main

Time display (Fig. 4a) is configured with the largest segments of

the LCD. Another time display (Fig. 4b) provides additional infor-

mation. Both are identified by clock icon.

Date is displayed only to identify dive data while it is viewed in

the Log Mode.

 When Units of Measure are set for 'Imperial', the Month ap-

pears to the left of Day. When set for Metric, the Month ap-

pears to the right of Day.

Temperature Display

Ambient Temperature is displayed (Fig. 5a) while in the Surface

Mode and can be viewed as part of an Alternate Display when the

Advance (Front) button is pressed while in a dive mode. If the

Temperature exceeds a value of '99', 2 dashes ( - - ) will be dis-

played on the screen until the unit's temperature decreases to '99'.

NOTE: The Informational Displays are described

in detail as the various operating modes they ap-

pear in are presented throughout this manual.

Fig. 4 - Time Displays

Fig. 5 - Temperature