Operation Manual

CARE AND CLEANING

Protect your XR1 from shock, excessive temperatures, chemical

attack, and tampering. Protect the Lens against scratches with an

Lens Guard/Protector. Small scratches will naturally disappear un-

derwater.

CAUTION: Never spray aerosols of any kind on, or

near, the instrument. The propellants may chemi-

cally attack the plastic.

 Soak and rinse the XR1 in fresh water at the end of each day of

diving, and check to ensure that the areas around the Depth Sen-

sor (Fig. 52a), PC Interface Data Port (Fig. 52b), and Buttons

are free of debris or obstructions.

 To dissolve salt crystals, use lukewarm water or a slightly

acidic white vinegar/water bath.

 After removal from the bath, place the unit under gently run-

ning water and towel dry before storing.

 Transport your unit cool, dry, and protected.

WARNING: Never force any object through any

slots or holes of the Housing. Doing so may dam-

age the depth sensor, possibly resulting in errone-

ous depth and/or dive time remaining displays.

Fig. 52 - Case Back