Operation Manual

RESET FEATURE

The XR1 is configured with a RESET feature that allows data to be

cleared, including Nitrogen calculations and Log Mode entries.

WARNING: Reset after a dive and subsequent use

for a repetitive dive conducted by the same diver

could result in serious injury or death.

Reset Procedure

 While the Surface Sequence is scrolling, press and release the

button to access the Log Mode's first Preview screen.

 Press and release the button again to access the Data screen.

 Press the button for more than 4 seconds while the Data screen

is displayed to access the Reset screen. The graphics CLR and

iD appear with the Key Code 0101, the first 2 digits flashing

(Fig. 51).

 If necessary to change the first 2 digits, press and release the

button repeatedly to advance to the correct number.

 Press the button for 2 seconds to save the first digits and ad-

vance to the second digits, flashing.

 If necessary to change the second 2 digits, press and release the

button repeatedly to advance to the correct number.

 Once the proper Key Code 0101 has been entered, pressing the

button for 2 seconds will shut down the unit (i.e., resetting it). If

an incorrect Key Code number has been entered, the unit will re-

vert to the Surface Sequence, resuming previous operation(s).

Fig. 51 - Reset (Clear)