Operation Manual

AFTER THE FIRST 2 HOURS

Two hours after the last dive, the Surface Sequence will no longer

be displayed. The Time to Fly and Time to Desaturate countdown

screens will be displayed alternately for 3 seconds each until they

count down to 0:00 or another dive is made.

If the Wet Activation Contacts are wet, the graphic H2O will ap-

pear on the displays (Figs. 49/50).

To access other modes or enter settings -

 Press the Button to reactivate the Surface Sequence.

 The unit will again revert to the Time to Fly/Desaturate count-

downs after 2 hours, if the Button is not pressed.

The unit will shutdown when the Fly countdown reaches :00. If

the Wet Activation Contacts are wet, the unit will reactivate and

scroll through the Surface Sequence for another 2 hours then shut-

down again.

Fig. 49 - Time to Fly

(activation contacts wet)

Fig. 50 - Time to Desaturrate

(activation contacts wet)