Operation Manual

42
Dive Data (the second Log screen) includes (Fig. 42) -
 Maximum Depth - reached during the dive (and MAX and FT or
M icons)
 Log Mode icon
 Temperature - minimum during the dive (and degree icon with
graphic F or C)
 Surface Interval - prior to that dive (and clock/wave icon)
 Elapsed Dive Time (and wave/clock icon)
 Variable Ascent Rate Indicator - showing the maximum Ascent
Rate maintained for 4 consecutive seconds during the dive.
 Nitrogen Bar Graph - showing tissue nitrogen loading at the
time you surfaced at the end of the dive. Also, the segment that
reflects the maximum loading during the dive will appear flash-
ing.
To access the Preview screen of the previous dive's Log, press and
release the Button momentarily (< 2 sec).
To return to the Surface Sequence at any time while in Log Mode,
press the Button for 2 seconds.
The unit will automatically revert to the Surface Sequence after 2
minutes if the Button is not pressed to view another Log Screen.
Fig. 48 - Log (Dive Data)
Max segment
Flashing