Operation Manual

41
Once the Log is full (12 dives), each subsequent dive will then
overwrite the oldest dive stored in the Log. It is therefore sug-
gested that you transfer the Log's data to your log book at the end
of each day of diving.
Log data will not be lost when the battery is removed/replaced,
however, factory service and calibration will delete the data.
The first dive conducted each time the unit is Activated will be #1,
therefore there may be multiple #1 dives in the Log.
Dives are displayed in a reverse sequence that starts with the dive
most recently recorded, back to the oldest one stored. The most re-
cent dive will always be the first shown in the sequence.
To access Log Mode -
 Press and release the Button momentarily (< 2 seconds) while
the unit is scrolling through the Surface Sequence.
 The Preview screen (Dive Identifier) of the most recent dive
conducted will appear displaying (Fig. 47) -
 Dive Number (for that activation period) and # icon
 Log Mode icon
 Date of the Dive (Month.Day or Day.Month if metric)
 Time of Day (that the dive started) and clock icon
 Press and release the Button (< 2 sec) to view the Data Screen.
Fig. 47 - Log Preview