Operation Manual

40
If a Violation occurred during the dive a single dash ( - ) will ap-
pear instead of the letters FLY (Fig. 45). DeSat time will not be
displayed.
The Time to Fly counter is provided to assist you with deciding
when enough surface time has elapsed to fly (or travel to higher el-
evations).
 After a surface interval of 12 hours, you may choose to fly (or
travel to higher elevations), provided that your dive profile(s)
did not enter decompression.
 If your diving involved decompression or a repetitive, multi day
profile, it is strongly recommended that you wait a full 24 hours
after your last dive to add a greater degree of protection.
Dive Planner
After a dive, the Dive Planner provides 'adjusted' No Decompres-
sion Limits (Fig. 46) based on residual nitrogen calculated to be re-
maining from that dive and previous dives in the same series.
Log Mode
The XR1 will store up to 12 dives in its Log for viewing.
Each dive has 2 Log screens. The first is the Preview (identifier)
and the second displays that Dive's Data.
Fig. 45 - Countdown
(after a Violation dive)
Fig. 46 - Adjusted NDLs