Operation Manual

To change the setting for Digital Gauge Mode -

 Press and release the Button momentarily to toggle between

OFF and ON.

 Press and hold the Button for 2 seconds to save the setting, re-

lease when the Set Wet Activation screen appears with the

graphics ACT, H2O, and ON (or OFF) flashing (Fig. 20).

To change the setting for Wet Activation -

 Press and release the Button momentarily to toggle between ON

and OFF.

 Press and hold the Button for 4 seconds to save the setting, re-

lease when the Surface Mode screen appears.

 During the 4 seconds, a PC screen will appear (Fig. 21) and can

be bypassed.

PC INTERFACE

PC Interface is not a setting or user function. It is included in the

Set menu for access by the factory personnel when calibrating the

XR1 module prior to shipping.

Fig. 20 - Set Wet Activation

Fig. 21 - PC Interface