Operation Manual

21
Scrolling Surface Sequence, you can set:
 Units of Measure - Imperial or Metric
 Hour Format - 12 or 24
 Time of Day - Hour:Minute
 Date - Year, Month, Day
 Digital Gauge Mode - On or Off
 Wet Activation - On or Off
HINT: To bypass a parameter that you do not want
to set, keep the Button depressed until the item
you do want to set appears, then release it.
To Access Set Mode and enter Settings:
While the unit is scrolling through the Surface Sequence -
 Press and hold the Button for 2 seconds, release when the Set
Units screen appears with the graphics FT and F (or M and C)
flashing (Fig. 15).
To change the setting for Units of Measure -
 Press and release the Button momentarily to toggle between Im-
perial (FT and F) and Metric (M and C).
 Press and hold the Button for 2 seconds to save the setting, re-
lease when the graphic Hour and 12 (or 24) appear flashing
(Fig. 16).
Fig. 15 - Set Units of Measure
Fig. 16 - Set Hour Format