Operation Manual

Wet Activation (only if set ON, a user setting)

The XR1 will also automatically activate by water contact. This is

accomplished by bridging the gap between contacts located on the

Button and Data Port on the side of the housing.

If no dive is made within 2 hours after activation, the unit will de-

activate. If the wet contacts are still wet, it will reactivate.

SURFACE SEQUENCE

While on the surface, the unit will automatically scroll through a

Sequence of displays including -

SURFACE > FLY > SAT > PLAN

As the Surface Sequence is scrolling, you can use the button to ac-

cess Log Mode and Set Mode.

SURFACE MODE

Surface Mode information includes (Fig. 12) -

 Dive Number if the module is dry (0 if no dive made yet), or the

graphic H2O if the module is wet (Fig. 13)

 Temperature (and degree icon and F or C graphic).

 Time of Day (with clock icon).

 Surface Interval (with flashing colon) and clock/wave icon.

 Battery Status icon.

Fig. 12 - Surface Mode

(module is dry)

Fig. 13 - Surface Mode

(module is wet)