Operation Manual

Time Displays

Time displays are shown in hour:minute format (i.e., 1:16 repre-

sents 1 hour and 16 minutes, not 116 minutes!). The colon that

separates hours and minutes blinks once per second when the dis-

play is indicating real time (e.g., Elapsed Dive Time), and is solid

(non-blinking) when times are calculated projections (e.g., Time to

Fly).

The Main Time display has the largest digits of the display (Fig.

4a) A second time display (Fig. 4b) is located above it. Both dis-

plays are identified by clock icons.

Date Display

Date is displayed only to identify dive data while it is viewed in

the Log Mode. When Units of Measure are set for 'Imperial', the

Month appears to the left of Day. When set for Metric, the Month

appears to the right of Day.

Temperature Display

Ambient Temperature is displayed in Surface Mode (Fig. 4c) and

Log Mode, and can be viewed on Main Display 3 while in a dive

mode (Fig. 5a). If the Temperature exceeds a value of '99', 2

dashes ( - - ) will be displayed until temperature decreases to '99'.

Fig. 4 - Time Displays &

Temperature (Surface)

Fig. 5 - Temperature

(dive mode)