Operation Manual

18
F.10 v.2 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-7260-r01 (4/19/11)
SURFACE SET MODES
Sequence: SURF MAIN >> SET A >> SET U >> SN (serial number).
• A & S (2 sec) to access and step through.
> Set A (Alarms) and Set U (Utilities) Set Points can also be changed using the ACI PC Interface program.
> Settings remain at the values set until changed.
SET A GROUP (ALARMS)
Sequence: AUD >> SRT >> EDT >> RDI >> DD 1 >> DD 2 >> DD 3.
• A & S (2 sec), while viewing SURF MAIN, to access Set A (Fig. 50).
The Set Audible feature provides complete OFF control of the Audible and its associated LED warning light. When set OFF, no beeps will be emitted
and the light will not flash when an alarm condition occurs, which some divers prefer during select activities. Icons and messages will still flash and the
Backlight will still come On.
The SRT (Surface Recovery Time) Alarm provides an alert when a set 'recovery time' has elapsed after surfacing from a dive.
The EDT (Elapsed Dive Time) Alarm repeats each time the Time Interval set is reached during operation in Dive Mode.
The RDI (Repeating Depth Interval) Alarm repeats each time the Depth Interval set is reached, except when the DD Alarms strike. If a series of de-
scents, ascents, descents is made, the Alarm will activate during each of the Descents.
The DD 1, 2, 3 (Descending Depth) Alarms can only be Set at progressively deeper Depths, with alerts given when each Depth set is reached during
descents.
SET AUDIBLE ALARM, information includes (Fig. 51):
> Graphic AUD (meaning Audible).
> Graphic ON (or OFF), flashing.
• S (< 2 sec) to toggle between ON and OFF.
• A (< 2 sec) to save the setting and access Set SRT Alarm.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
SET SRT ALARM, information includes (Fig. 52):
> Graphic SRT (meaning Surface Recovery Time).
> Time (min:sec) with SURF and TIME icons.
> Graphic ON (or OFF), flashing.
• S (< 2 sec) to toggle between ON and OFF.
• A (< 2 sec) to save the setting.
> If OFF is accepted, operation will advance to Set EDT.
> If ON is accepted, the Minute digits will flash.
• S (hold) to scroll upward through the Minute Set Points at a rate of 8 per second from 0: to 30: in increments of 1 minute.
• S (< 2 sec) to step upward through the Minute Set Points one at a time.
• M (< 2 sec) to step back through the Minute Set Points one at a time.
• A (< 2 sec) to save the Minute setting and flash the Seconds digits.
• S (hold) to scroll upward through the Second Set Points at a rate of 8 per second from :00 to :59 in increments of 1 second.
• S (< 2 sec) to step upward through the Second Set Points one at a time.
• M (< 2 sec) to step back through the Second Set Points one at a time.
• A (< 2 sec) to save the min:sec setting and access Set EDT Alarm.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
SET EDT ALARM, information includes (Fig. 53):
> Graphic EDT (meaning Elapsed Dive Time).
> Time (min:sec) with TIME icon.
> Graphic ON (or OFF), flashing.
• S (< 2 sec) to toggle between ON and OFF.
• A (< 2 sec) to save the setting.
> If OFF is accepted, operation will advance to Set RDI.
> If ON is accepted, the Minute digits (min:sec) will flash.
• S (hold) to scroll upward through the Minute Set Points at a rate of 8 per second from 0: to 9: in increments of 1 minute.
• S (< 2 sec) to step upward through the Minute Set Points one at a time.
• M (< 2 sec) to step back through the Minute Set Points one at a time.
• A (< 2 sec) to save the Minute setting and flash the Seconds digits.
• S (hold) to scroll upward through the Second Set Points at a rate of 8 per second from :00 to :59 in increments of 1 second.
• S (< 2 sec) to step upward through the Second Set Points one at a time.
• M (< 2 sec) to step back through the Second Set Points one at a time.
• A (< 2 sec) to save the min:sec setting and access Set RDI Alarm.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
Fig. 50 - SET A
Fig. 51 - SET AUDIBLE
ALARM
Fig. 52 - SET SRT ALARM
Fig. 53 - SET EDT ALARM