Operation Manual
16
F.10 v.2 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-7260-r01 (4/19/11)
SET FREE CDT (Surface only), information includes (Fig. 35) -
> Graphics TIMR and SEt.
> Timer setting (min:sec), colon solid and Minute digits flashing, with the TIME icon.
• S (hold) to scroll upward through the Minute Set Points at a rate of 8 per second from 0: to 59: in 1 Minute (1:) increments.
• S (< 2 sec) to step upward through the Minute Set Points one at a time.
• M (< 2 sec) to step back through the Minute Set Points one at a time.
• A(< 2 sec) to save the Minute setting and flash the Seconds digits.
• S (hold) to scroll upward through the Seconds Set Points at a rate of 8 per second from :00 to :59 in 1 Second (:01) increments.
• S (< 2 sec) to step upward through the Second Set Points one at a time.
• M (< 2 sec) to step back through the Second Set Points one at a time.
• A(< 2 sec) to save the Second (and full CDT) setting and revert to CDT Status with OFF flashing (Fig. 36).
• S (< 2 sec) to toggle to ON and Start the CDT.
• A (< 2 sec), or M (2 sec), or if no button (2 min), to revert to SURF MAIN.
SURF ALT 2, information includes (Fig. 37):
> Time of Day (hr:min:sec) with TIME icon.
> Temperature with degree icon and graphic F (or C).
• A (< 2 sec), or no button (5 sec), revert to SURF MAIN.
• L (press) to operate the Backlight.
LOG
Log Mode displays information from the latest 99 dives sequentially in reverse order (the most recent first).
Log information is retained until over written by another dive.
After exceeding 99 dives, the most recent Dive completed will be added to the Log and the oldest deleted.
Battery removal will not affect the Log data stored for viewing.
Dives will be numbered 1 to 99 starting at # 1 each new calendar day, or period of activity. After midnight, the first dive of the next day will be # 1.
It will also be #1 if you reset the Dive # to 0 by pressing S (2 sec) while viewing the SUF MAIN.
• A (2 sec), while viewing FREE SURF Main or Watch Main Time, to access Log, regardless of the BDSI (Between Dive Surface Interval) time set.
Upon entering Log Mode, the most recent dive’s Log 1 screen will be displayed.
• A (2 sec) to bypass other Log screens and access History.
• A (< 2 sec) to access that dive's Log 1, 2, 3 screens.
• S (hold), while viewing a Log 1, 2, or 3 screen to scroll through the previous dives' Log 1, 2, or 3 screens at a rate of 8 per second.
• S (< 2 sec) to step through the screens.
• M (< 2 sec) to step back through the screens.
• No button (2 min) to revert to FREE SURF Main or Watch Main Time.
• L (press) to operate the Backlight.
LOG 1, information includes (Fig. 38):
> Graphic No with the dive number (1 to 99) for that day, or period of activity.
> Max Depth with MAX and FT (or M) icons.
> Log (book) icon.
> Pre Dive SI (min:sec, hr:min if > 59:59) with SURF and TIME icons, blank if Dive #1.
> Elapsed Dive Time (min:sec) with DIVE and TIME icons.
LOG 2, information includes (Fig. 39):
> Graphic No with the dive number (1 to 99).
> Log (book) icon.
> Date of the dive (Year, Month.Day or Day.Month).
LOG 3, information includes (Fig. 40):
> Am (or Pm) icon, if 12 Hour Format.
> Graphic No with the dive number (1 to 99).
> Log (book) icon.
> Time of Day (hr:min:sec) the dive began with TIME icon, and graphic A to the left if Alternate Time was selected as the Watch Default Time when
the dive was conducted.
> Temperature (minimum recorded that dive) with degrees icon and graphic F (or C).
LOG 4 (Profile)
The Log 4 screen allows you to analyze dives on site without the use of the PC interface system. The dive's Depth can be observed while elapsed dive
time is increased or decreased throughout the dive beginning at descent.
LOG 4, information includes (Fig. 41):
> Graphic No with the dive number (1 to 99).
> Max Depth with FT (or M) icon.
> Log (book) icon.
> Graphic Pro indicating that the screen is displaying interactive Profile data for that dive.
> Elapsed Dive Time (min:sec) with DIVE and TIME icons.
• S (< 2 sec) to start a slow auto step up of EDT at a rate of 1 second EDT per real time second, displaying the Depth values for each EDT value.
• S (< 2 sec) to stop/freeze the auto step up.
• S (press & hold) to start an upward scroll of EDT at a rate of 8 seconds of EDT per each real time second, displaying the Depth values for each
EDT value.
• S (release from hold) to stop the scroll and freeze EDT.
• M (< 2 sec), when stopped, to step back EDT 1 second per pres/release.
• A (< 2 sec), at any time, or no button (2 min), to revert to the FREE SURF Main or Watch Main Time.
Fig. 35 - SET CDT
Fig. 36 - CDT STATUS
(Set, ready to Start)
Fig. 37 - SURF ALT 2
Fig. 38 - LOG 1
Fig. 39 - LOG 2
Fig. 40 - LOG 3
Fig. 41 - LOG 4
(Prole after 52 sec)