Operation Manual

12
F.10 v.2 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-7260-r01 (4/19/11)
WATCH DAILY ALARM
When set ON, the Watch Daily Alarm will sound the Audible Alarm and flash the warning LED every day at the Time set.
DAILY ALARM STATUS, information includes (Fig. 19):
> AM (or PM) icon, if 12 Hour Format.
> Graphics ALRM, with ON (or OFF) flashing
> Alarm Time (hr:min) with TIME icon.
> Alarm (speaker) icon.
• S (< 2 sec) to toggle between ON and OFF.
• A and S (2 sec) to access Set Daily Alarm.
• M (2 sec) or no button (2 min) to revert to Watch Main.
• L (press) to activate the Backlight.
SET DAILY ALARM, information includes (Fig. 20):
> AM (or PM) icon, if 12 Hour Format.
> Graphics ALRM and SEt.
> Alarm Time (hr:min) with the Hour digits flashing.
> Alarm (speaker) icon.
• S (hold) to scroll upward through Hour Set Points at a rate of 8 per second in 1 Hour increments from 12: AM to 11: PM (or 0: to 23: if 24 hour
format).
• S (< 2 sec) to step upward through the Hour Set Points one at a time.
• M (< 2 sec) to step back through the Hour Set Points one at a time.
• A (< 2 sec) to save the Hour setting and flash the Minute digits.
• S (hold) to scroll upward through the Minute Set Points at a rate of 8 per second in 1 Minute increments from :00 to :59.
• S (< 2 sec) to step upward through the Minute Set Points one at a time.
• M (< 2 sec) to step back through the Minute Set Points one at a time.
• A (< 2 sec) to save the Minute setting (and full Alarm time) and revert to the Daily Alarm Status screen with the graphic ON (or OFF) flashing.
• M (2 sec) or no button (2 min) to revert to Watch Main.
If no dive is conducted within 2 hours after accessing Free Mode, operation will rvert to Watch Main Time.
Operation will also revert from Free Surface Mode to Watch Main Time 2 hours after completion of a dive or if M is pressed
(2 sec) while viewing Free Surface Main.
Fig. 20 - SET DAILY
ALARM
Fig. 19 - DAILY ALARM
STATUS