User Manual

A
SCALE 1 : 6
STEP 09
STEP 08
A
Socket Screw M2.5x6mm
8 pcs ( SHS-2506)
Four groups like this
Plug in the motor
wires to ESC wires
SCALE 1 : 6
FINISHED ASSEMBLY
B
STEP 10
B
Button Screw M3x30mm
1 pcs ( BHS-3030 )
Hollow Spacer 22mm support
landing gear
1 pcs ( 3D-024 )
canopy pin
1 pcs ( 3D-008 )
Install the
canopy in
this direction
Body Clip
1 pcs ( 3D-008 )
canopy
1 pcs ( 3D-006 )
locking
locations
STEP 11
- Main rotor diameter: 458mm (with 06 inch propellers)
- Propeller length: 06 inch
- Weight including standard electronics: 4000g (excluding
batteries).
- Battery compartment: 2200mAh
Chapter 07 – Arm system assembly, Clamp systems assembly,
GPS system assembly
Chapter 08 – Frame upper system assembly, Frame lower
system assembly, Llink of sprayer system.
Chapter 09 – Assembling the Groups
Chapter 10 – .................
INDEX
Chapter 01 – Specifications
Chapter 02 – Important notes
Chapter 03 – In the Box
Chapter 04 – Landing gear systems assembly
Chapter 05 – Sprayer systems assembly
Chapter 06 – Electronic tray assembly, Pump
system assembly, Battery tray assembly.
CARBON FLAST - RUBBER - POWER DISTRIBUTION BOARD
Motors: DYS BE1806
Propeller: 6 Inch, 4 pcs
ESC:
Battery: 3S 2200mah
Flight Controller
Camera
CNC PARTS
ALL PARTS
SUGGESTED SOMPONENTS
To use the loctite 243 on the bolts metal
FINISHED ASSEMBLY
Note:
Cameras will be assembled this
location when we finished the kit
To use the loctite 243 on the bolts metal
Use Loctite on all metal bolts
Carbon Tube 14x16x129mm
2 pcs ( 3D-010 )
30A Reversible ESC
4 pcs ( 3D-017 )
Power Distribution Board
1 pcs ( 3D-019 )
Nylon screw M3x12
and Nylon nut M3
( four couples )
STEP 05
STEP 04
FINISHED ASSEMBLY
Spacer 12mm
4 pcs ( 3D-025 )
Button Screw M3x18mm
( BHS-3018 )
MOTOR WIRES GO FROM
ESC THROUGH CF TUBES
BEC 5V-3A
NOTE: PLUG IN THE ESC AND BEC WIRES TO
FLIGHT CONTROLLER CORRECTLY
Button Screw M3x5mm
13 pcs ( BHS3005 )
Button Screw M3x12mm
8 pcs ( BHS3012 )
Black-Motor mount
2 pcs ( 3D-004 )
MOTORS
Black-Motor mount
2 pcs ( 3D-004 )
Button Screw M3x5mm
13 pcs ( BHS3005 )
ESC 3
STEP 06
SOLDER BEC WIRES TO PDB
BEC 5V-3A
MOTOR WIRES GO FROM
ESC THROUGH CF TUBES
NOTE: PLUG IN THE ESC AND BEC WIRES TO
FLIGHT CONTROLLER CORRECTLY
Button Screw M3x8mm
1 pcs ( BHS-3008 )