Installation guide
WS3083
- 10 -
pressure reading to allow for your altitude. To do so make sure you have selected Relative as
above and change the pressure reading to match with a local benchmark such as the local air
pressure provided for your area on the Met Service or Bureau of Meteorology websites. If
Absolute pressure is selected, skip this step.
Pressure high alarm (press ON/OFF to enable/disable). If the alarm is enabled, an alarm symbol
appears in the display.
Pressure low alarm (press ON/OFF to enable/disable). If the alarm is enabled, an alarm symbol
appears in the display.
Maximum pressure value (since last reset). Resetting the maximum pressure value - when both
the pressure value and MAX icon are flashing, hold the ENTER key for 3s, the maximum pressure
value will be reset to the current reading.
Minimum pressure value (since last reset). Resetting the minimum pressure value - when both the
pressure value and MIN icon are flashing, hold the ENTER key for 3s, the minimum pressure value
will be reset to the current reading.