Installation guide

- 9 -
WS1093
Setting Up
For basic settings touch the Touch Screen in the desired display area using the stylus. Note: setting
procedure can be exited at any time by touching any other function area (except “+”, “-” or “ON/OFF”.
The basic settings can be performed as follows:
Time
1) Touch the TIME section, the + and – button will be flashing. Touch the + button or – button to adjust
the contrast level from 0 to 8 (default 5).
2) Touch the TIME section again, the + and – button will be flashing. Touch the + button or – button to
set the time zone.
3) Touch the TIME section a third time, the + and – button will be flashing. Touch the + button or –
button to shift between the 12 and 24 hour formats.
4) Touch the TIME section a fourth time to set the hour setting, the + and – button will be flashing.
Touch the + button or – button to change the value.
5) Touch the TIME section a fifth time to set the minute setting, the + and – button will be flashing.
Touch the + button or – button to change the value.
Note: The radio controlled clock (RCC) works off the German DCF77 time signal received across large parts
of Europe and the UK so set your time zone as follows:
Country
Time Zone setting
Country
Time Zone setting
Iceland (-2 for German DST)
-1
Poland
0
Ireland
-1
Slovakia
0
Portugal
-1
Spain
0
United Kingdom
-1
Sweden
0
Albania
0
Switzerland
0
Austria
0
Bulgaria
+1
Belgium
0
Estonia
+1
Croatia
0
Finland
+1
Denmark
0
Greece
+1
France
0
Latvia
+1
Germany
0
Lithuania
+1
Hungary
0
Moldova
+1
Italy
0
Romania
+1
Netherlands
0
Turkey
+1
Norway
0
Ukraine
+1
Note: Because of the default settings already determined by the manufacturer it may not be necessary for
the majority of users to perform any further basic settings - except for the Relative Air Pressure
(see below). Changes, however, can be easily made.