User Manual Owner's manual

AM Series Boilers and Water Heaters
CHAPTER 3 – INSTALLATION
Page 32 of 156 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0100_0B
PRI - 07/14/14 Ph.: 800-526-0288 GF-146
3.10 Unpacking and Installing the Unit
Unpacking Instructions
1. Remove the outer shipping carton from the water heater.
2. Remove the lower front cover “A” at front of the unit by pulling it forward to access and
remove the screw and washer “B” (Figure 3-3).
Figure 3-3: Removing the Unit from Wood Pallet (Front)
3. Remove the screw and washer “C” at the rear of the unit (Figure 3-4).
Figure 3-4: Removing the Unit from Wood Pallet (Rear)
A
B
C