Technical information

Airfusion Radar Installation Instructions
3 | Page
PARTS LIST
Unpack your ceiling fan carefully. Remove all parts and hardware. Place the fan motor on a cloth or soft surface to avoid
damaging the finish.
• Do not lay the motor housing on its side – the decorative housing may become bent or damaged.
• Verify that all parts are present before starting assembly.
• Check the packaging carefully for missing parts.
Examine all parts. You should have the following:
1 Mounting bracket x 1 7 Remote transmitter with holder x 1 set
2 Fan assembly with hanging plate, receiver, and
motor x 1
8 Extra Motor screws x 1 (not shown)
3 Motor housing x 1 9 Wooden screw x 4 (not shown)
4 Blade x 3 10 Screw for remote holder x 2 (not shown)
5 Blade bracket kit x 3 11 12V Battery for remote x 1 (not shown)
6 Bottom cover x 1
Fig. 1