Technical information

Airfusion Radar Installation Instructions
2 | Page
IMPORTANT INFORMATION – PLEASE READ PRIOR TO INSTALLATION
Congratulations on purchasing the latest in energy saving ceiling fans. This Airfusion Radar fan runs on DC (direct
current) power which gives it the benefit of being super energy efficient whilst still maintaining high volume air-movement
and silent operation.
Energy saving - The DC motor is the latest technology in fan design. Its highly efficient motor saves up to 65% more
energy than ceiling fans with traditional AC motors.
Silent operation – This DC fan motor is programmed with a stabilized current which efficiently reduces motor noise.
Low operating temperature – The DC power is managed effectively which brings down the motor operating
temperature to less than 50degs. This results in a much cooler motor than a standard AC fan and increases the longevity
of the motor.
Regular AC ceiling fans usually come with only 3 speeds, this Airfusion Radar DC fan comes complete with a 6 speed
remote, which gives a greater choice of comfort levels.
SAFETY PRECAUTIONS
1) This ceiling fan is NOT intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
2) Children should be supervised to ensure that they do not play with the appliance.
3) An all-pole disconnection switch must be incorporated in the fixed wiring in accordance with the wiring rules.
4) Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can
leak into the groundwater and get into the food chain, damaging your health and well-being.
5) The structure to which the fan is to be mounted must be capable of supporting a weight of 30kg.
6) The fan should be mounted so that the blades are at least 2.3 metres above the floor for Europe.
7) The fan should be mounted so that the blades are at least 2.1 metres above the floor for Australia.
8) This fan is suitable for indoor use only. Mounting the fan in a situation where it is subject to water or moisture is
dangerous.
9) Only an authorized electrician should execute the installation.