User manual

Channel 2:
Input XLR combination with a socket for a 6.3 mm jack plug and XLR male socket
Line/Mic switch to adjust input sensitivity
Line: sources with line level, instruments with active preamplifiers
and magnetic sound pick-ups, Mic: symmetrical microphone input
with 30 V phantom source
Clip overload indicator
Gain input level control
Bass tone control for bass
Treble tone control for treble
Eff. Pan panorama control to distribute the effects between the channels
Select switch for two effect programmes (reverberation, reverberation/delay)
Return level control for the internal effect
Power power indicator lamp
Master level control for the overall volume
Low batt. low charge indicator lamp
Charge charge indicator lamp
48V on/off 48V phantom power on/off
Aux–Return level control for the Aux–Input (e.g. CD–player)
Rear
(from left to right):
Aux–In input for CD and tape
Phones headphone output
Tuner output for a tuner after the master control
Line-out preamplifier output after the master control
DI-out XLR output before the master control
Send output for an external effect device
Return input for an external effect device or another signal source, for example
CD–player
Footswitch connection for a double foot switch with which the effects can be
switched on and off.
12V/DC only connection for an external 12V/DC–battery, not suitable for
a connection to a board–net.
DC on/off On/Off–switch for an external battery–connection.
Power on/off combined mains switch with a mains socket and a fuse-
holder (1 A slowblow) for both operating–modes
Compact mobile
3
A
Part of the action