User`s manual

AEQ PHOENIX MERCURY
9
Physically, the connector is RJ45 10/100 BT, with the following pinout.
RJ45 connector pinout
2.2.6. USB Port.
The USB port can be configured as Master or Slave. By default, it leaves the factory configured
as Slave. This port can be connected to a USB port in a PC, permitting a data transmission
speed of up to 480Mbps (USB 2.0), just for equipment maintenance purposes.
IMPORTANT NOTE: Do not use this connector for any reason without the supervision of AEQ
technical service personnel.
2.2.7. Power supply.
Connector for external 12V - 1A adapter. The unit accepts from 12 to 15VDC. Power
consumption is around 8W. The universal mains adapter provided operates from 100 to 240 V
AC, 50-60Hz.
2.3. IP interface.
The PHOENIX MERCURY is a stationary IP audio codec, fully compatible with the EBU-TECH
3326 technical specification formulated by the EBU N/ACIP working group, which was
developed to guarantee compatibility between different manufacturers in applications for
contributing professional quality audio over IP networks. For further information, consult:
http://tech.ebu.ch/docs/tech/tech3326.pdf
The connector is an RJ45 for a 10/100 Base T interface.
This interface is used for remote control, configuration and upgrade, SIP signalling and RTP
audio transmission over IP.
PHOENIX MERCURY is designed to ensure interoperability with existing and future
communications equipment developed by AEQ and other manufacturers, thanks to the large
number of encoding algorithms it implements, and to the possibility of easily bringing them up to
date as the market evolves.
G
F