User`s manual

AEQ PHOENIX MERCURY
24
- phxCh1TxAudioThreshold (Audio threshold for channel 1's input)
- phxCh1TxAudioInterval (Audio interval for channel 1's input)
- phxCh1RxAudioThreshold (Audio threshold for channel 1's output)
- phxCh1RxAudioInterval (Audio interval for channel 1's output)
3. Information messages (GET): showing a status, they don't arrive spontaneously or are
activated/deactivated like the Alarms, but they are requested by the SNMP client by means of
"GET" messages:
- phxCh1Status (Channel 1's status) --> (OK, CONNECTED, CONNECTING,
DISCONNECTING, CALLING, NO LINK, REGISTER ERROR, REGISTERING, CALL
ERROR)
- phxCh1TxAudio (Ch1's audio input indicator status). Indicates the status of the virtual
LED indicating audio presence, according to the corresponding configurated
parameters.
- phxCh1RxAudio (Ch1's audio output indicator status). Indicates the status of the virtual
LED indicating audio presence, according to the corresponding configurated
parameters.
- phxCh1OnAir (Ch1's ON AIR option activated or not)
- phxCh1Synced (Ch1's audio synchronized or not)
- mib2.system (sysUpTime, sysContact, sysDescr, sysServices,…): Standard SNMP
commands indicating things such as equipment's turn on time, etc. For more
information, please check MIB-II specification in RFC1213
(http://tools.ietf.org/html/rfc1213)
For more information, please consult section 5.6 of this manual and section 6.5.1 of “AEQ
ControlPHOENIX” application manual.