Manualshelf

User`s manual

ManualsBrandsAEQ ManualsMusical equipmentFORUM
31323334353637383940
AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS
38
Memory screen
Each stored memory is identified by its name and the date on which it was created. Except for
DEFAULT, the names of the memories are editable from the Configuration Software (see
section 4. CONFIGURATION SOFTWARE in this manual).
The options available through the contextual keys below the screen, from left to right, are:
• BACK: pressing this key allows you to return to the previous menu screen. No change
you may have made is saved.
• SAVE stores in the selected memory position, the configuration of the console at that
moment. The system will ask for your confirmation.
• LOAD allows you to load the configuration you stored previously in that memory
position. The system will ask for your confirmation.
You can also save or load a configuration from the remote Configuration Software. See section
5 of this manual.
3.4. Main Menu
Pressing on MENU will take you to the MAIN MENU screen. From this advanced configuration
menu you can control, among other parameters, audio inputs and outputs, internal routing and
processes. The default screen in AEQ FORUM shown in the main Control and Monitoring
section display includes the AEQ logo, the product name and current date and time. The four
options visible on the last line of the display are associated with the four contextual keys below,
from left to right:
Main menu screen
• BACK: pressing this key allows you to return to the previous menu screen. At this point
no change you may have made is saved.
• INFO: essentially a maintenance menu displaying information on alarms and firmware
versions installed in the various console operating modules.
• SETUP, which displays the IP configuration associated with the two Ethernet ports
available on the back panel of the equipment (see section XX of this manual) in the
form of an IP address (IP1 or IP2), subnet mask (MK1 or MK2) and gateway (GW1 or
GW2). Only Level 3 users can modify these values.
• SELECT: advanced configuration of audio inputs / outputs, processes and internal
routing.