User`s manual

AEQ FORUM - DIGITAL AUDIO MIXER FOR BROADCAST APPLICATIONS
36
Chrono screen
3.2. LOGIN / LOGOUT Menu
This menu allows AEQ FORUM users / operators to register in the system, so that the
equipment recognizes their user level by the associated password, and assigns them an access
level for subsequent operation in the various console sub-menus.
AEQ FORUM enables up to four different user levels, each with its associated profiles and
passwords:
• LEVEL 0: users with no associated password. The operation is limited to raising and
lowering faders and opening and closing channels.
• LEVEL 1: These users may perform the same actions as the Level 0 users, and can
also activate equalizers and filters and modify audio channel input and output gains.
• LEVEL 2: Operators having this profile can carry out the same actions as Level 1
operators, plus operate, configure and control the rest of the parameters associated
with dynamics effects, phase, change the internal routing... in short, all of the
possibilities offered by the AEQ FORUM control surface and its associated internal
menu, except for changing the IP addresses of the two LAN and ETHERNET network
ports present in the rear panel of the equipment (action specifically reserved for Level 3
users).
• LEVEL 3: This is the highest level in the system, reserved for administrators. It enables
full access to all the equipment menus and configuration options, and, in addition, is the
only level enabling access to the Configuration Software. The same password is used in
this menu integrated into the control surface and in remote Configuration Software. For
more information, see section 4. CONFIGURATION SOFTWARE in this manual.
The LOGIN / LOGOUT contextual key has two possible uses: LOGIN to register yourself and
LOGOUT to de-register. When you register through the option in the LOGIN screen, six spaces
are displayed on screen associated with the six digits of the password. The password must be
configured in advance from the Configuration Software (see section 4. CONFIGURATION
SOFTWARE of this manual). If you lose your password, contact AEQ’s Central Technical
Assistance Service at [e-mail] or call [phone].
LOGIN screen
The procedure for entering the password requires the use of the four contextual keys beneath
the display and the three associated encoders.