User`s manual

AEQ FORUM
Digital audio mixer for broadcast applications
76
To set a programmable key, simply click on it with the mouse and select from the list on the right
to associate action. The available options are:
• “None”: no action associated.
• “General”: associated with activation of GPI and/or GPO.
• “Salvo”: allows you to configure activation/deactivation of a Salvo.
• “Codec”: associated with remote control of external communications equipment through
GPIs and GPOs.
• “Multiplex”: allows you to make a quick management of signal routing toward a “MPX”
type internal summing bus (these buses are typically used for sending to codecs,
hybrids or other auxiliary destinations).
• “Cue Reset”: allows you to cancel all the signals sending to the CUE bus at that
moment.
• “Orders”: allows you to send the orders microphone to the selected output channel.
• “Memory”: allows you to load the selected configuration memory or snapshot.
4.3.2.2. Configuration of “General“ programmable keys.
Programmable keys that are set to “General” are used to activate GPIs and GPOs. A key set to
this function is assigned with a dedicated icon.
The lower part of the “Programmable Keys” submenu will show the associated options for
“General” type keys, when this configuration mode is selected:
In order to be able to configure the programmable key (or edit a previously created
configuration), you have to press the “Edit Configuration” button, to active and allows you to
configure the following fields: