User`s manual

EAGLE - ANNEX A.6. Installation of the EAGLE as an ISDN hybrid. 73
Connection of an EAGLE to TWO BC-2533 channel:
In this case, both channels will be used as independet and the mixer will do the multiplex in
case it is needed.
In order to configure remote control, the following programming bridges of the BC2533 has to be
set:
PDP 7 and 10: ON
PDP 8, 9, 11 and 12: OFF (removed)
In the proposed cable diagram, each EAGLE channel is controlled by the upper part of the
remote buttons of each BC2533: