User`s manual

EAGLE

Multi-Standard Dual-Channel Digital Audio Codec

There is another option in the software that allows running an automatic upgrading process

when many EAGLE have to be upgraded. Run File/Automatic.

The following window will appear:

Use the icons in the right part of the screen for selecting the new upgrade files to be loaded on

the EAGLE and press OK to start.

 NOTE: This procedure will work on equipments that have a Microprocessor version higher

than 2.20 because when upgrading from a previous version, a non-volatile memory reset is

needed. This reset will set node number to 255 loosing this EAGLE control until node

number is set again. If this is the case, the upgrade process should be done manually.

 Some new Microprocessor versions need to erase existing configuration,

including node number. The EAGLE will loose phone-book and start up

configurations and will loose communication with the software so it will be

necessary to set this number again before continuing upgrading.