User`s manual

EAGLE
Multi-Standard Dual-Channel Digital Audio Codec
41
Clicking the setup button of the ‘virtual’ EAGLE front panel, set up window is showed:
In this window all configuration parameters can be set.
When clicking in ‘PhoneBook’, the phone-book stored in the audiocodec internal memory is
read so after some time it can be viewed in the Setup/Phone Book option. This process might
take some seconds and it is done in the background.
REMOTE RESET
It is possible to use a remote reset signal from this window. To activate it, eagle.ini file has to be
edited and a password has to be wrote where it says:
“PASSWORD=”
This key-word would be asked as a confirmation each time somebody clicks the ‘Reset’ button
that will appear close to the ‘PhoneBook’ one, the next time the program is run.
NOTES:
• This reset signal makes configuration come to its original factory settings.
• Only equipment connected physically to the E@sy bus can be reseted.