User`s manual

EAGLE
Multi-Standard Dual-Channel Digital Audio Codec
37
5.3.1.3 CLIENT APPLICATION
5.3.1.3.1 INSTALLATION
Run the “Eagle.exe” program which is contained in the CD-ROM and follow all the steps
of the install shield wizard.
NOTES:
- Installing this software in a PC that is inside an intranet requires supervisor rights over the
computer. In that case, consult your system supervisor.
- The first time this Install Shield Wizard is used, it will ask you to restart the system. If you
have used this wizard before, It won’t be necessary to restart.
5.3.1.3.2 OPERATION
When installation is finished, the EAGLE Real-time Control program is executed clicking on the
icon created in the desktop.
Before executing the program, IP configuration has to be made:
To configure it, the EAGLE.INI file has to be edited. This file is in the path:
“C:\Program files\Aeq\ EAGLE Realtime Control\” , and will look like this:
In ‘HOST’, the IP address or name of the server PC has to be set. By default, program is
installed in local mode (HOST=127.0.0.1), that is, the EAGLE is controlled from the same PC it
is connected to. If this PC is not the same as the the one where the E@sy server is, this has to
be changed to the new value.
When IP address can not be reached or when E@sy server is not running, an error message
will be displayed:
 This change will be operative the next time the program is started.
[EASY SERVER]
PORT=60300
HOST=LocalHost
PROXY=211