User`s manual

EAGLE
Multi-Standard Dual-Channel Digital Audio Codec
32
5.2. PACKAGE DESCRIPTION
5.2.1. CD-ROM CONTENT
In this package, you receive an auto-start up CD-ROM containing Manuals, the latest firmware
files and these applications:
- E@syServer. Server software application.
- Eagle. Client/Controlling application.
- EagleFu. Upgrading application.
To install the applications, insert the CD in your PC’s CDROM drive and wait until the
menu appears. In case it does not appear, check that the auto start feature of your
CDROM drive is enabled.
5.2.2. HARDWARE AND SOFTWARE REQUIREMENTS
This system can work over an IP network or in a stand-alone PC.
In both cases, minimum requirements are:
Compatible PC with a Pentium processor or higher, 32MB RAM Memory and a hard drive.
When using a remote-control application, remote PC should have an IP connection with server
PC. This can be through a LAN or a WAN network.
Server computer must have one free serial port. It will be necessary a RS232 to RS422
standard converter for interconnecting the PC and the EAGLE.
Software runs on Windows NT, Windows 2000 and Windows XP operating systems.
This software requires the TCP/IP extension to be installed in the operating system. This
extension is automatically installed when a network card or a modem is installed. In case of
using a stand-alone PC, it is necessary to install the “MSLoopback” driver, which is included in
both operating systems installation disks.
[e-mail] program will be installed in the PC connected to the E@sy bus.
eagle.exe will be installed in those remote computers from where equipment is going to
be controlled. In case of a stand-alone computer, both programs should be installed in
the same PC.
EagleFu.exe upgrading application works from a PC with direct connection to the EAGLE
audio codec.