User`s manual

EAGLE
Multi-Standard Dual-Channel Digital Audio Codec
24
4.8. Generating and managing calls, dialing.
Manual dialing is done in the DIAL section (3) (10) (11). Up to 31 digits numbers are allowed.
- Press the top ON/OFF key to launch a call from channel 1, or press the bottom ON/OFF key to
launch a call from channel 2. When these keys are pressed, their associated LED’s light up in
red, indicating that these channels are in use.
- Key in the desired number using the number pad (2). If the number is stored in the phone
book, then instead of dialing it, press the cursor arrows until you get to the desired phone book
position. Press OK to launch the call.
Once a connection is made, the red light indicator associated with the ON/OFF key may show
two statuses:
AMBER when connected but not synchronized.
GREEN when it is both connected and synchronized.
Once the call has been made, we can put it in waiting mode (WAIT) or on the air (ON AIR).
- If we put the call in waiting mode ( WAIT), the remote point can receive audio from our
equipment, but it is prevented from going on the air.
- If we put the call on the air (ON AIR), the remote point can both receive audio and go on the
air through our equipment.