User`s manual

EAGLE
Multi-Standard Dual-Channel Digital Audio Codec
23
4.7. Automatic off-hook.
The equipment allows the off-hook process to be automatic as soon as a call is received, or
manual, thus allowing the user to decide whether to answer and connect to the incoming call.
This selection is done in the SETUP section (1) (9).
- On the main screen, press NO (red) to access the SETUP menu.
- With the cursor arrows, go to the OFF HOOK option and press OK
- With the cursor arrows:
- Select MANUAL for the user to take the call off hook.
- Select AUTOMATIC for automatic off-hook when a call is received.
LINE 1
LINE 2
MANUAL
AUTOMATIC
MANUAL
AUTOMATIC
Incoming call filter.
It is possible to filter incoming calls, that is, it is possible to set the audiocodec so that it will only
automatically off-hook incoming calls from a previously specified ISDN number. The
AUDIOCODEC will only off-hook if incoming number matches with the one that was configured.
In case that incoming call origin number is not the one stored, incoming call message will be
showed so the user can decide to manual off-hook.
This filter can be set for both channels independently.
This numbers are set in ‘5.OFF-HOOK’ setup menu, selecting Line 1 or Line 2, in the ‘CALLING
NUMBER’ parameter.
Automatic off-hook has to be selected before storing these numbers.