User`s manual

EAGLE
Multi-Standard Dual-Channel Digital Audio Codec
14
15.- Audio selection switch 1.
To obtain the send (Tx) (GO), return (Rx) (F’B) or both, send + return (Tx+Rx) (GO+F’B) signals
at the output.
 In standard operation conditions, this swich will be set to ‘FB’ position. Then, incoming
audio from the remote codec will be available at the EAGLE’s XLR outputs.
16.- Audio selection switch 2.
To obtain the send (Tx) (GO), return (Rx) (F’B) or both, send + return (Tx+Rx) (GO+F’B) signals
at the output.
 In standard operation conditions, this swich will be set to ‘FB’ position. Then, incoming
audio from the remote codec will be available at the EAGLE’s XLR outputs.