Specifications

Engineering Specification
Page 4
1. Make sure the product is powered.
2. Press and hold the button for at least 10s, and then Factory Reset is performed. The product will issue a Device Reset Locally Command
via its Lifeline to notify the Lifeline destination that the product has been reset to its factory default state. And it will perform the reset
operation regardless of whether or not the delivery of the Device Reset Locally Notification is successful.
Note:
If you press and hold the button, 5 to 10 seconds, the Green LED will slow flash,and then Green LED light 2 senconds until the factory
settings are restored.
Resetting the product is not the recommended way of removing the product from the Z-Wave network. Use reset procedure only if the
primary controller is missing or inoperable. Certain product removal can be achieved by the procedure of removing described in “How to
remove the product”.