Specifications

Engineering Specification
Page 2
2 Specifications
2.1 Structural Characteristics
Parameter
Value
Product Identifier
ZW027
Dimensions
34x34x16 mm
Color
White
IP Class
IP 20
Usage
Indoor
2.2 Hardware Characteristics
Parameter
Value
Z-Wave Module
ZGM130S
Z-Wave TX Power
Max:13dBm
Z-Wave Antenna Distance
40m(Indoor)/150m(outdoor)
Indicator Light
2 red ,2 green
Battery Type
1*CR2477
Work Current
15mA(wake up), 20mA(Semd message)
Standby Current
4uA
2.3 Software Characteristics
Parameter
Value
Wireless Technology
Z-Wave
Z-Wave Plus™
Z-Wave Plus V2
Z-Wave Version
7.15.1
Z-Wave Device Type
Notification Sensor
Z-Wave Role Type
ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_SLEEPING_REPORTING(0x06)
Generic Device Type
GENERIC_TYPE_SENSOR_NOTIFICATION(0x07)
Specific Device Type
SPECIFIC_TYPE_NOTIFICATION_SENSOR(0x01)
Security Class
Non-Security, S0, S2 Unauthenticated, and S2 Authenticated
SmartStart Compatible
Support. After powering on, SmartStart is auto activated.
Over The Air (OTA)
Support. Firmware can be updated via RF.
Multi Channel Device
No
Association
Support. Refer to Section 4.6 Association Group Info.
Factory Reset
Support. Refer to Section 3.3 How to factory reset.
Power-down Memory
Support. All command settings will stay unchanged even power down.
Low Battery warning
Support.