Specifications

Engineering Specification
Page 1
1 Overview
The Temperature Humidity Sensor measures the three air quality parameters temperature, humidity and dew point and reports them to a
central controller. Besides this, the device can directly control groups of other Z-Wave™ devices on over- and undershooting a set
temperature and/or humidity parameter.This can be used to establish control loops for temperature and humidity.
This product supports Security 2 Command Class. While a Security S2 enabled Controller is needed in order to fully use the security feature.
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All mains operated
nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
This product supports SmartStart. SmartStart enabled products can be added into a Z-Wave network by scanning the Z-Wave QR Code
present on the product with a controller providing SmartStart inclusion. No further action is required and the SmartStart product will be
added automatically within 10 minutes after this product being powered on in the network vicinity.