User Guide

Welcome to your

Button

Setup

Use the SmartThings mobile app to

select the “Add device” card and

then select the “Remote/Button”

category.

Make sure the Button is within

15 feet (4.5 meters) of your

SmartThings Hub or SmartThings

Wiﬁ (or compatible device with

SmartThings Hub functionality)

during setup.

Remove the tab on the Button

marked “Remove When Connecting”

and follow the on screen instructions

in the SmartThings app to complete

setup.

PAGE 1
Welcome to your Setup Button 1. Make sure the Button is within 15 feet (4.5 meters) of your SmartThings Hub or SmartThings Wiﬁ (or compatible device with SmartThings Hub functionality) during setup. 2. Use the SmartThings mobile app to select the “Add device” card and then select the “Remote/Button” category. 3. Remove the tab on the Button marked “Remove When Connecting” and follow the on screen instructions in the SmartThings app to complete setup.
PAGE 2
Placement Troubleshooting The Button can control any connected devices at a touch of a Button. 1. Hold the “Connect” button with a paperclip or similar tool for 5 seconds, and release it when the LED starts blinking red. 2. Use the SmartThings mobile app to select “Add device” card and then follow the on-screen instructions to complete setup. Simply place the Button on the table, desk, or any magnetic mating surface. The Button can also monitor temperature.