Assembly Instructions for Tilting Flat Panel Wall Mount ~ English Motorists S Astronauts For Part Numbers EON-35107 and EON-35108 WARNING STATEMENTS Prior to the installation of this product, the installation instructions should be read and completely understood. The installation instructions must be read to prevent personal injury and property damage. Recommended mounting surfaces are wood studs and solid-flat concrete.
Assembly Instructions for Tilting Flat Panel Wall Mount — English Sl TR RUNS For Part Numbers EON-35107 and EON-35108 Step 1 Wall Plate Installation Wood Stud Installation NOTE: For secure wood stud mounting, the wall plate must be mounted to two studs at least 16 inches apart. 1. Use a high-quality electronic stud finder to locate two adjacent studs and mark their locations with a pencil. (Fig 1-a} 2.
Assembly Instructions for Tilting Flat Panel Wall Mount ~ English Clavicles 80 Tourists For Part Numbers EON-35107 and EON-35108 Step 2 Display Bracket [installation To ensure optimal installation, this kit includes various screws of different diameters and lengths. 1. Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display. 2.
Grands & Courts Assembly Instructions for Tilting Flat Panel Wall Mount ~ English For Part Numbers EON-35107 and EON-35108 Ste 3 Final Adjustment i Prior to installation, Tues in the two active blades which are on the bottom of the two monitor brackets, make sure the two active blades are In horizontal position.
Assembly Instructions for Tilting Flat Panel Wall Mount ~ English Stan's 80 Mounts Sepia level Stadium 1. I the levelness of the display have 3 little deviation, using the Lang spanner{N) to tighten or Loosen the two bolts at the both sides of the two monitor brackets. {Fig 4-0) That can make the display rotate in a little angle. (Fig 4-£) The two monitor brackets have auto-lock function.
Assembly Instructions for Tilting Flat Panel Wall Mount ~ English ditherer TSN For Part Numbers EON-35107 and ANON-35108 Notes and Measurements: Page 7 Aron Stands and Mounts
