Your Smart Sprinkler & Security Guardian User Guide VERSION 1.
Table of Contents What’s in the Box 3 Overview 4 Yardian LED Indicator 5 Wi-Fi Reset Button 6 Understand Your Irrigation System 7 The Yardian Installation 8 Step 1. Replace your old controller 10 Step 2. Install your Yardian controller 12 Step 3. Get the Yardian app 18 Step 4. Pair your Yardian to your profile 20 Step 5.
What’s in the Box 1 Yardian, the controller Model: YDN1602 2 Wi-Fi dongle Model: WL-7200-V2 3 Labeling stickers (adhere to original controller wires for easy identification) 4 3 wall screws and anchors
Overview G A LED indicator B Camera C IR LED (night vision) D Light sensor E Product label F Warranty label G Wi-Fi reset button H Wi-Fi dongle I Terminal blocks A H SN : MAC : YID : A A 0 0 75 4 F E F I B C D
Yardian LED Indicator 1 second 1 second System Wi-Fi Station Mode Booting Up Connecting to Your Router Initializing Connected to Your Router Firmware Updating Watering (Do not turn off power) Reboot Required (Press Wi-Fi Reset Button until LED turns red) Wi-Fi AP Mode (Direct Control) Access Point Mode Reboot Required - Action Failed (Press Wi-Fi Reset Button until LED turns red) Watering
Wi-Fi Reset Button Press SN : MAC : YID : 5 > sec Reset Wi-Fi Press and hold for around 5 seconds and release when the LED is blinking green and blue. AA00754F >10 Reset to factory default sec Press and hold for around 10 seconds and release when the LED turns red.
Understand Your Irrigation System Water Main Common Wire P If you have a master valve, we suggest to connect it to the last zone and specify it in Yardian app.
The Installation Set up your Yardian in a few easy steps.
Take a picture of your current wiring. This will help you identify the correct sequence of wires.
Step 1. Disconnect your old controller and remove sprinkler wires. Adhere a numeric labeling sticker to tag each associated wire. Remove your old controller from the wall. WARNING 2 Electrical Hazard 3 1 11 Zones 5 6 Exposed sprinkler wires with 24Vac could generate an electric shock in wet location. 4 5 6 Please ask your retailer or contractor if sprinkler accessories may be needed.
Identify an appropriate spot to mount your Yardian so that the camera is able to view your designated location (e.g., inside the garage).
Step 2. Open the top cover. Mark the wall for the screws. Mount the Yardian with the screws.
Step 2. Open the inside cover.
Step 2. Connect sprinkler wires according to the corresponding labels. SN : MAC : YID : AA 0 0 7 5 4 F Note: Please specify rain sensor type (normally open or closed) in the app if applicable. 8 Zones 12 Zones Note: If you have a master valve, we suggest to connect it to the last zone and specify it in Yardian app.
Step 2. Close the inside cover and the top cover. PRESS HERE CLICK SN : MAC : YID : Note: Please make sure you hear a click sound by pressing at the top of the inside cover.
Step 2. Plug the Yardian electrical cord into the home outlet.
Create an account and personal profile. Sign in the Yardian app with your account.
Step 3. Enter your Profile Name and your Zip Code (or click on the map to find your location), then click the "Save" button to proceed. Note: The profile captures all the information about your yard at a specific location (e.g., your home). Cancel Add Profile Profile Name Locate Your Yardian (Country: US) Please note that you can not change the location more than 5 times per day.
Click the Yardian device setting card to start pairing. S tep 4 My Yardian Yardian Device Setting Pair your Yardian to your profile Unpaired Please Cick To Pair.
Step 4. Yardian Pairing Enter the 8-digit Yardian ID number (YID) on the device.
From the app, click the Yardian card and go to "Wi-Fi onboarding": S tep 5 Wi-Fi onboarding My Yardian Yardian is Offline Yardian Device Setting YID: AA00754F Paired Offline The Yardian is now paired to your Profile. You can now set up Wi-Fi connection for your Yardian. Yardian will use historical ETo and rainfall weather data for watering schedules when it is offline.
Step 5. Device Settings Wi-Fi Onboarding 12:45 AM Settings Scan Sprinkler Valves 90% Wi-Fi Wi-Fi Master Valve None Rain Sensor None 24VAC Power Supply None My Wi-Fi Router CHOOSE A NETWORK... Other Routerplease turn on For iOS users, Wi-Fi on your mobile device. Wi-Fi Onboarding YID Step1.
Step 5. Please stay close to the Yardian device when doing "Wi-Fi onboarding". Check Yardian’s LED status. Yardian should be in Wi-Fi AP mode to proceed (LED blinking green and blue). Press If Yardian is not blinking green and blue, please press and hold the Wi-Fi reset button for around 5 seconds and release when you see the LED blinking green and blue.
Step 5. Wi-Fi Onboarding Select the Yardian SSID. SN The Yardian app will scan for nearby wireless signals to provide you with a list of wireless networks to choose AA007 54 Ffrom. Yardian - aa:00 : MAC : YID : Step1.
Step 5. This step applies to Android. This step applies to iOS. Specify your home Wi-Fi router SSID # and password. Specify your home Wi-Fi router SSID #. Wi-Fi Onboarding Step 2. Specify Your Wi-Fi Router SSID My Wi-Fi Router Cancel Accessory Setup This accessory will be set up to join “My Wi-Fi Router“. Select Step 3. Input Your Wi-Fi Router Password NETWORK PASSWORD My Wi-Fi Router ●●●●●●●●●● Start Onboarding Next Show Other Networks...
Step 5. WARNING! Check your Yaridan LED: if it turns into a steady green light, it means that you have successfully connected your Yardian to your Wi-Fi network. Congratulations! You have successfully set up your Yardian. Software may be updated when Yardian is connected to the Internet. Please DO NOT turn off the power when the LED is blinking RED. Interrupting the software update process may result in system malfunction.
iOS 9.0+ and Android 4.
Setup of the App Easy access to the settings with 5 simple tabs
You may review all information here Home Receive the latest information regarding your watering schedule, Yardian notifications, and more.
My Yardian Yardian will use historical ETo and rainfall weather data for watering schedules when it is offline.
You get to control all zones here Instant Control your zones to start watering at any desired time with just a touch of the button on your mobile device.
Instant Control Start Zone(s) MyZone1 Select Zone Select Zone Select All Zone MyZone1 02:00 Home Instant Yard MyZone2 Cancel Program Monitor Set
Profile your yard Yard You may set up and manage all your yard profile information here. Our app can automatically detect the connected zones and enable them.
My Yard MyZone 1 Zone 1 Warm Season Grass Spray Head A Go to the “Yard” tab.
Program the watering schedule Program "Smart Program" covers all zones by default. The Yardian may be up and running without manual programming once you specify your zone profiles.
My Program Smart Program Smart Program designs automatic watering schedules based on your zone profiles, weather data, watering restrictions, and your preferences for each zone. MyZone 2 Add New Manual Program Program Mon, Thr 06:30 6mins (Adjust: 2 mins) Manual Program allows you to create your own watering schedule. You have the choice to apply “Seasonal Adjustment” in your manual programs.
Watch live video streaming and more Monitor You can view live video streaming via your Yardian camera here.
Video Live Cancel History Settings Save Motion Detection Video Cloud Recording Alert Home Instant Yard Program Monitor Sensitivity 55 Threshold 5
support.aeonmatrix.com support@aeonmatrix.
Smart Sprinkler Controller Limited Warranty THIS LIMITED WARRANTY CONTAINS IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Aeon Matrix, Inc. may restrict this Limited Warranty service for the Product to the country where the Product or its authorized distributors originally sold the Product. Aeon Matrix, Inc.
WHAT THIS LIMITED WARRANTY DOES NOT COVER This Limited Warranty does not cover the following (collectively “Ineligible Products”): Products or their components marked as “sample” or sold “AS IS”; or Products or their components that have been subject to: (a) unauthorized modifications or alterations, tampering, unauthorized or improper maintenance or repairs; (b) handling, storage, installation, testing or use not in accordance with the User’s Guide or other instructions provided by Aeon Matrix; (c) abus
LIMITATION OF LIABILITY OF INFORMATION THE AEON MATRIX ONLINE SERVICES (“SERVICES”) MAY PROVIDE YOU INFORMATION (“PRODUCT INFORMATION”) REGARDING YOUR PRODUCT OR OTHER PERIPHERALS CONNECTED TO YOUR PRODUCT (“PRODUCT PERIPHERALS”). THE TYPE OF PRODUCT PERIPHERALS THAT MAY BE CONNECTED TO YOUR PRODUCT MAY CHANGE FROM TIME TO TIME. WITHOUT LIMITING THE GENERALITY OF THE DISCLAIMERS ABOVE, ALL PRODUCT INFORMATION IS PROVIDED FOR YOUR CONVENIENCE “AS IS” AND “AS AVAILABLE”.
www.yardian.com © 2018 Aeon Matrix Inc. All rights reserved.
